700 Rotary Meter
The TCS 700 rotary flow meter combines excellent accuracy with low pressure drop. The TCS 700 rotary flow meter has a compact size and lightweight design that offers minimal maintenance and long service life. This meter is built with advanced materials of construction for a broad range of measurement applications and is accompanied by a full selection of accessories and electronic registration..
-
The TCS 700 series rotary flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact within the chamber, eliminates any deterioration in accuracy and provides a long service life.
The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, giving a consistent and superior measurement of accuracy.
-
- Flow: Capable of up to 1,000 GPM (3,785 LPM); Bi-directional Flow
- Linear Accuracy: Capable of ± 0.15% of over the full flow range
- Repeatability: Capable of 0.02% (constant operation conditions with 700SP meters & mechanical registration, using 1 CPS test fluid)
- Viscosity: Will accurately measure liquids up to 1,500,000 SSU (325,000 CPS)
- Temperature: – 40 to 160°F (- 40 to 71°C)
- Approvals: Meets a wide range of weights and measures requirements. (Contact factory for information on specific approvals.)
-
700 AF – All Ferrous
Materials of Construction: Ductile Iron, Stainless Steel, Carbon Graphite, Ni-Resist, PTFE
For metering Pesticides, Fertilizers, Food Processing Liquids, Industrial Chemicals, Solvents, Paints, Inks, Alcohols and many other liquids; such as Liquid Sugars, Liquid Feeds, MEK, Ethanol, Corn Syrup, Soy Bean Oil, Shortenings, Latex Products, Adhesiv700 IC – Industrial Products Carbon Bearings
Materials of Construction: Anodized Aluminum, Stainless Steel, Carbon Graphite, Treated Stainless Steel, Ni-Resist, Simriz*, PTFE
For metering Alcohols, Chemicals, Solvents, Water and many other Non-Lubricating Liquids such as Acetones, Ethanol, Naphta, Xylene, MEK, Toluene, Resins, etc.700 IP – Industrial Products Stainless Steel Bearings
Materials of Construction: Anodized Aluminum, Stainless Steel, Treated Stainless Steel, Ni-Resist, Simriz*, PTFE
For Food Processing, Chemicals, General Solvents and many other liquids such as Corn Syrup, Soy Bean Oil, Liquid Sugars, Shortenings, Latex Products, Adhesives, etc.700 LP – Liquefied Petroleum Gas
Materials of Construction: Anodized Aluminum, Stainless Steel, Ni-Resist, Buna
For metering Liquefied Petroleum Gas (LPG) and NH3700 SP – Standard Petroleum Meters
Materials of Construction: Anodized Aluminum, Stainless Steel, Treated Stainless Steel, Ni-Resist, FKM
For metering refined petroleum products such as Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.700 SPA – Standard Petroleum Aviation
Materials of Construction: Anodized Aluminum, Stainless Steel, Carbon Graphite, Treated Stainless Steel, Ni-Resist, FKM
For metering refined petroleum products such as Aviation Gasoline, Jet Fuels, Ethanol, Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.700 SPD – Standard Petroleum Ductile Nodular Iron
Materials of Construction: Ductile Iron, Stainless Steel, Carbon Graphite, Treated Stainless Steel, Ni-Resist, FKM, Simriz*
For metering refined petroleum products such as Ethanol, Methanol, Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Aviation Gasoline, Vegetable Oils, Motor Oils, Naptha, Ethylene Glycol, etc.700 SS – Stainless Steel
Materials of Construction: 316 Stainless Steel, Carbon Graphite, Treated Stainless Steel, Simriz*, PTFE
For metering the same products as the SP, SPA, SPD and AF meter types, but includes special handling liquids; such as Acids, Anti-Icing Fluids, Vinegar, Fruit Juices, Corn Syrup, Micro-Nutrients, etc.700 SSD – Stainless Steel DEF
Materials of Construction: Stainless Steel, Treated Stainless Steel, Ryton, EPDM
For metering Diesel Exhaust Fluid (DEF), AdBlue, ARLA and AUS32. -
TCS 700-15
- Meter Types: IC, IP, SP, SPA
- Flange Connections: 1 1/2” NPT Flange; 1” & 2” Options
- The 700 1.5″ rotary flow meter is engineered to meter liquid at up to 60 GPM (227 LPM).
TCS 700-20
- Meter Types: AF, IC, IP, LP, SP, SPA, SPD, SS, SSD
- Flange Connections: 2” NPT Flange; 1 1/2” Option
- The 700 2″ rotary flow meter is engineered to meter liquid at up to 100 GPM (380 LPM).
TCS 700-25
- Meter Types: SPA, SPD
- Flange Connections: 2” NPT Flange
- The 700 2″ rotary flow meter is engineered to meter liquid at up 150 GPM (567 LPM).
TCS 700-30
- Meter Types: AF, IC, IP, SP, SPA, SPD
- Flange Connections: 3” NPT Flange; 2” Option
- The 700 3″ rotary flow meter is engineered to meter liquid at up to 200 GPM (760 LPM)
TCS 700-35
- Meter Types: SPA, SPD
- Flange Connections: 3” NPT Flange
- The 700 3″ rotary flow meter is engineered to meter liquid at up to 300 GPM (1,135 LPM).
TCS 700-40
- Meter Types: AF, IC, IP, SP, SPA, SPD
- Flange Connections: 4” NPT Flange; 3” Option
- The 700 4″ rotary flow meter is engineered to meter liquid at up to 500 GPM (1,893 LPM).
TCS 700-45
- Meter Types: SPA, SPD
- Flange Connections: 4” NPT Flange
- The 700 4″ rotary flow meter is engineered to meter liquid at up to 600 GPM (2,271 LPM).
TCS 700-60
- Meter Types: SPA
- Flange Connections: 6” ANSI Flange
- The 700 6″ rotary flow meter is engineered to meter liquid at up to 800 GPM (3,040 LPM).
TCS 700-65
- Meter Types: SPA
- Flange Connections: 6” ANSI Flange
- The 700 6″ rotary flow meter is engineered to meter liquid at up to 1,000 GPM (3,800 LPM).