Hannay Reels es líder en la fabricación de duraderos carretes para manguera y cable, aptos para fabricantes y para posventa. Ofrecemos miles de modelos estándar, además de una amplia gama de diseños personalizados. Las excelentes técnicas de fabricación, la calidad uniforme, un servicio sobresaliente y el inmejorable valor de Hannay dan lugar a los carretes más confiables y mejor diseñados del sector. Desde 1933, esta fórmula ha consolidado la reputación de Hannay al ayudar a empresas de todo el mundo a mejorar las productividad, eficacia y seguridad de sus operaciones.
Aviation
-
Single Wrap Power Rewind Reels
To handle single 1-1/2″ I.D. through 3″ I.D. hose
Jet/AV Gas Fuel Dispensing- Effortless and fast rewinding, wrapping, and guiding of hose.
- Chain and sprocket drive powered by electric, hydraulic, or compressed air motor.
- Auxiliary crank rewind, optional.
- 12v rewind, comet brake, reduction unit standard.
- Air brake optional.
- Inlet and hub assembly are aluminum and/or stainless steel for jet fuel.
- Consult factory for other pressures and temperatures.
- SERIES 5100 (1-1/2″): Standard inlet: 90° ball bearing swivel joint, 1-1/2″ female NPT threads, 2″ Victaulic® groove, flanged riser with 1-1/2″ female NPT threads; pressures to 600 psi (41 bar); temperatures from -25° F to +250° F (-32° C to +121° C).
- SERIES 5200 (2″): Standard inlet: 90° ball bearing swivel joint, 2″ Victaulic® groove, flanged riser with 2″ female NPT threads; pressures to 150 psi (10 bar); temperatures from -50° F to +180° F (-45° C to +82° C).
- SERIES 5300 (3″): Standard inlet: I-hub (aluminum only) straight 3″ Victaulic® groove inlet, flanged riser with 3″ female NPT threads; pressures to 150 psi (10 bar); temperatures from -50° F to +180° F (-45° C to +82° C). Optional I-hub joints are available in: 3″ straight flanged, 3″ 90° flanged, 3″ 90° Victaulic®.
-
Manual or Power Rewind Reels
To handle single 1-1/4″ or 1-1/2″ I.D. hose
Jet/AV Gas Fuel Dispensing- Rugged, industrial-duty construction.
- Gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic, or compressed air motor.
- Optional auxiliary crank rewind for power rewind reels.
- Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake.
- Standard inlet: 90° ball bearing swivel joint with 1-1/2″ female NPT threads and 2″ Victaulic® groove
- Standard outlet: Flanged riser with 1-1/2″ female NPT threads.
- Other sizes and/or threads can be furnished and must be specified.
- Inlet, outlet riser, hub assembly are aluminum for jet fuels..
- Stainless steel fluid path is available at extra cost.
- Rollers and roller mounting brackets are accessory items. Must specify roller position.
- Chain guard is available upon request; must be specified.
- Pressures to 600 psi (41 bar).
- Temperatures from -25°F to +250° F (-32° C to +121° C).
- Consult factory for other pressures and temperatures.
-
Spring Rewind Reels
To handle 1″ I.D. hose
Jet/AV Gas Fuel Dispensing- Standard N series has a narrow frame and compact mounting base.
- Non-sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet: 90° # 304 stainless steel ball bearing swivel joint, 1″ female NPT threads.
- Standard outlet: 1″ female NPT threads.
- Pressures to 1000 psi (69 bar).
- Temperatures from -40° F to +250° F (-40° C to +121° C).
- Consult factory for other pressures and temperatures.
- 4-way roller assembly.
- Constant tension is available consult factory.
-
Stainless Steel Spring Rewind Reels
To handle 1/4″ through 1/2″ I.D. hose
Lubrication / Potable Water / Chemical Transfer / Washdown / Corrosive Environments- Standard SSN Series has a narrow frame and compact mounting base.
- Non-sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet: 90° stainless steel ball bearing swivel joint, 1/2″ female NPT threads.
- Standard outlet: 1/2″ female NPT threads.
- Standard pressures to 3000 psi (207 bar).
- Temperatures from +20° F to +400° F (-7° C to +204° C).
- Consult factory for other pressures and temperatures.
- 4-way roller assembly.
- Constant tension is available consult factory.
- 304 stainless steel construction.
- Optional SST Mosmatic ½” balanced pressure swivel joint available, subtract 1.50″ from “F” dimension, specify when ordering.
-
For Refueling or Hazardous Areas
- Aircraft refueling
- Chemical plants
- Grain elevators
- Rescue and Hazmat operations
- These reels bond and/or ground aircraft, fuel trucks, and other equipment.
- Provide smooth operation and require minimum cable pull.
- Declutching arbor and adjustable guide arm with cable guide.
- Standard finish is oven-cured enamel.
- Manual rewind version also available.
- All shown with optional cable and/or “Y” branch
- Available with 1/8″, 7×19 galvanized carbon steel cable.
- 100 amp alligator clamp.
- Stainless steel or plastic-covered cable and “Y” branches available at additional charge.
Fuel Delivery
-
Power Rewind Reels
- “SB” prefix denotes polished aluminum construction, offering both reduced weight and superior corrosion resistance compared to standard steel construction.
- Choose #40 chain and sprocket drive powered by an electric, hydraulic, or compressed air motor or direct drive hydraulic rewind motor.
- Auxiliary crank rewind standard on DPB Series reels. Available on PB Series power rewind reels, at extra cost.
- Direct drive hydraulic rewind reels supplied with pinion brake. Electric powered rewind reels supplied with strap brake.
- Other brake and locking devices may be specified. See Ordering & Accessory Guide.
- Standard inlet: 90° ball bearing swivel joint with 1-1/2″ female NPT threads.
- Standard outlet: flanged riser with 1″ female NPT threads.
- Standard inlet, outlet riser, and hub assembly are steel.
- Other sizes and/or threads can be furnished and must be specified.
- Pressures to 350 psi (24 bar).
- Temperatures from -40° F to +350° F (-40° C to +177° C).
- Consult factory for other pressures and temperatures.
- Chain guard available upon request, must be specified.
- Assembly B bottom wind roller is standard.
-
Single Wrap Power Rewind Reels
To handle single 1-3/8″ I.D. through 2″ I.D. hose
- Effortless and fast rewinding, wrapping, and guiding of hose.
- Chain and sprocket drive powered by electric, hydraulic, or compressed air motor.
- Auxiliary crank rewind optional.
- 12v rewind, comet brake standard.
- Air brake optional.
- 5100 series: 90° ball bearing swivel joint, 1-1/2″ female NPT threads, 2″ victaulic® groove, flanged riser with 1-1/2″ female NPT threads.
- 5200 series: 90° ball bearing swivel joint, 2″ Victaulic® groove, flanged riser with 2″ female NPT threads.
- Inlet and hub assembly are aluminum.
- Joint and riser ductile iron for petroleum fuel.
- Pressures to 600 psi (41 bar).
- Temperatures from -30° F to +250° F (-34° C to +121° C).
- Standard with a reduction unit only. Electric clutch units optional.
- Consult factory for other pressures and temperatures.
-
Spring Rewind Reels
To handle 1/2″, 3/4″, or 1″ I.D. hose for DEF (Diesel Exhaust Fluid)
- Narrow frame and compact mounting base.
- Non-sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet: 90° 304 SST full-flow swivel joint w/EPDM seals & female NPT threads.
- Standard fluid path & outlet: 304 SST fluid path.
- Standard outlets: 1/2″, 3/4″ and 1″ female NPT threads.
- Pressures to 2000 psi (138 bar).
- Temperatures from -40° F to +250° F (-40° C to +121° C).
- 4-way roller assembly.
- Constant tension is available consult factory.
-
Spring Rewind Reels
To handle 3/4″ or 1″ I.D. hose
- Non-sparking ratchet locks reel.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet: 90° ball bearing swivel joint with 1″ female NPT threads.
- Standard outlet: 1″ female NPT threads.
- Other sizes and/or threads can be furnished and must be specified.
- Pressures to 350 psi (24 bar).
- Temperatures from -40° F to +350° F (-40° C to +177° C).
- Consult factory for other pressures and temperatures.
- Supplied 4-way roller assembly. Specify roller position.
-
Power Rewind Reels for Inverted Installation
To handle single 1-1/4″ I.D. through 2″ I.D. hose
- Chain and sprocket drive powered by electric, hydraulic, or compressed air motor.
- Comet brake, air caliper brake, standard.
- Standard inlet: 90° ball bearing swivel joint with 1-1/2″ female NPT and 2″ groove.
- Optional 2″ internals also available.
- Standard outlet: Flanged riser with 1-1/2″ female NPT threads.
- Inlet, riser and hub assembly are steel.
- Stainless steel or aluminum available consult factory.
- Optional auto chain tensioner available consult factory.
- Pressures to 600 psi (41 bar).
- Temperatures from -30° F to +250° F (-34° C to +121° C).
- Consult factory for other pressures and temperatures.
