Valves
Mechanical, pneumatic and electronic actuated piston and diaphragm control valves designed to meet the variety of needs in the fluid process industry. Such valves include preset flow control valves, pump control valves, pressure relief and safety valves.
-
Especifications:
- Size: 1-1/2″
- Type: SP, SPA, SPD, AF, SS & SSD
- Pressure: 150 PSI (10.5 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Material: Aluminum, Ductile Iron or Stainless Steel
- Seals: EPDM, FKM or PTFE
Compatible Meters:
-
Especifications
- Size: 1-1/2″, & 2″
- Type: SP, SPA, SS & SSD
- Pressure: 150 PSI (10.5 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Flow Capacity: Up to 200 GPM
- Viscosity: 2800 SSU (580 cPs)
- Body Material: Aluminum or Stainless Steel
- Solenoid Material: Brass or Stainless Steel
- Seals: FKM
- Voltage: 12 or 24 VDC; 110 or 240 VAC
Compatible Meters:
-
A normally closed, hydraulically balanced piston control valve allows for auto-batch preset deliveries. The right angle, two–stage control valve is mechanically linked to Veeder Root Preset Counter.
Especifications
- Size: 1-1/2″, 2″, 3″ & 4″
- Type: SP, SPA, SPD, IC, IP, AF, SS & SSD
- Pressure: 150 PSI (10.5 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Material: Aluminum, Ductile Iron & Stainless Steel (2″ only)
- Seals: EPDM, FKM or PTFE
Compatible Meters:
- TCS 700-15
- TCS 700-20
- TCS 700-25
- TCS 700-30
- TCS 700-35
- TCS 700-40
- TCS 700-45
-
A normally closed two-stage piston preset valve for use with electronic relay control. Stainless steel or brass pilot valves are available. Dimensionally interchangeable with the 750 Hydraulic Preset Valves.
Especificactions
- Size: 1-1/2″, 2″ & 3″
- Type: SP & SPA
- Pressure: 150 PSI (10.5 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Flow Capacity: up to 300 GPM
- Viscosity: 2800 SSU (580 cPs)
- Body Material: Aluminum
- Solenoid Material: Brass or Stainless Steel
- Seals: FKM & PTFE
- Voltage: 12 or 24 VDC; 110 or 240 VAC
Compatible Meters:
- TCS 700-15
- TCS 700-20
- TCS 700-25
- TCS 700-30
- TCS 700-35
-
The diaphragm differential pressure control valve has a normally closed, spring loaded design. Provides a constant 15 PSI differential pressure and controls flow when vapor is sensed. Security and 2-stage solenoid valves are available upon request. UL Listed.
Especifications
- Size: 2″
- Type: LP
- Pressure: 350 PSI (24.6 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Material: Aluminum
- Seals: UL Viton
Compatible con:
-
The air check valve operates on differential pressure, closing when air is present. Designed to increase air eliminator efficiency during product depletion.
Especifications
- Size: 2″ & 3″
- Type: SP
- Pressure: 150 PSI (10.5 BAR)
- Temperature: -40F to 160F (-40C to 71C)
- Material: Aluminum
- Seal: FKM
Compatible Meters:
- TCS 700-20
- TCS 700-25
- TCS 700-30
- TCS 700-35
-
Oil Capitol Valves (OCV) valves are hydraulically operated, diaphragm actuated for multi-function control of non-corrosive, non-abrasive fluids. Available in globe or angle configuration, these fully automatic valves operate off line pressure or if desired, from an independent power source..
The wide range of control pilots makes it possible to offer combination models for virtually any fluid-handling need. The basic Series 65 valve contains only one moving part. This simplicity of design promotes dependability, reduces down-time, facilitates service and extends the life of the valve.
Control valves are offered for a wide variety of automatic and self-actuated system applications: such as pump control valves, pressure relief and safety valves, and flow control valves..
-
In-line check valve is mounted between the strainer and meter assembly to help increase air eliminator efficiency by creating additional back pressure and help reduce the reverse back flow.
- Size: 1-1/2″, 2″, 3″ & 4″
- Material: Plated Steel or Stainless Steel